The DriveRack VENU360 from dbx is a loudspeaker-management processor designed to protect and optimize various loudspeaker systems in diverse settings such as clubs, outdoor music events, and houses of worship. This device connects between the mixer and amplifiers/powered speakers and offers feedback elimination, automatic speaker level and room equalization, crossover-frequency setting, dbx compression/limiting, and driver alignment delay. It features a 5 x 6 routing/mixing matrix with 4 AES signals and 1 analog signal, and a 3 x 6 signal processing chain. The unit employs 24-bit A/D and D/A converters with dbx Type IV conversion to prevent digital clipping and utilizes 32-bit floating point, 48/96 kHz internal processing for high-quality audio with significant headroom and dynamic range.
The PB-48 patchbay offers durable and noise-free performance, with 48 front and 48 rear 1/4″ points, available in half-normalled or de-normalled configurations. Ideal for efficient studio gear management, it eases mixer access, minimizes jack wear, and enables fast device rerouting.
The PMC16 is a 16-channel personal monitor controller designed for precise audio mixing with dbx TR1616 or any BLU link compatible device. It supports monitoring via headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Users can daisy chain multiple PMC16s through CAT5e cable, enabling each to receive 16 channels of high-resolution digital audio for personalized mixes. The PMC16 features a 16-channel mixer with level, panning, effect send, muting, soloing controls, onboard Lexicon® reverb, stereo width control, EQ settings, and dbx limiting. Its Setup Wizard, channel grouping, and 16 preset locations enhance usability.
The Zone Controllers enhance the functionality of DriveRack® and ZonePRO™ series, offering nine models that utilize analog DC voltage for controlling zone source selection, volume, muting, program or scene selection, and fire safety muting. They connect using standard CAT5 cables with RJ-45 connectors, supporting distances up to 1000 ft, providing contractors with reliable and straightforward control solutions.
The Zone Controllers enhance functionality for DriveRack® and ZonePRO™ systems, supporting nine controllers with analog DC voltage for various controls including zone source selection, volume, muting, and fire safety. Using affordable CAT5 cable with RJ-45 connectors, they can operate up to 1000 ft, making installation straightforward for contractors.
The Zone Controllers enhance the functionality of DriveRack® and ZonePRO™ systems, utilizing analog DC voltage for controlling zone source selection, volume, muting, program or scene selection, and fire safety muting. They connect via CAT5 cable with RJ-45 connectors, covering distances up to 1000 ft, providing a straightforward yet efficient solution for contractors.
The ZC Zone Controllers enhance the DriveRack® and ZonePRO™ systems with nine models that utilize analog DC voltage for various controls, including zone source selection, volume, muting, program or scene selection, and fire safety muting. They connect easily with CAT5 cables and RJ-45 connectors over distances up to 1000 feet, providing straightforward and sophisticated solutions for contractors.
The ZC-7 Zone Controller is a programmable push-to-talk page assignment controller designed for the ZonePRO™ devices, leveraging analog DC voltage for extensive logic control. It supports functions such as zone source selection, volume control, muting, program or scene selection, and fire safety muting. This device is wired using cost-effective CAT5 cables with universally accepted RJ-45 connectors, enabling connectivity up to 1000 ft, providing a seamless integration into the DriveRack® and ZonePRO™ families.
The Zone Controllers enhance the DriveRack® and ZonePRO™ series by utilizing analog DC voltage for functions such as zone source selection, volume control, muting, program/scene selection, and fire safety muting. These controllers are connected using cost-effective CAT5 cable with RJ-45 connectors, supporting installations up to 1000 feet, providing contractors with efficient and practical system control solutions.
The Zone Controllers enhance the functionality of DriveRack® and ZonePRO™ products by offering logic control via analog DC voltage for tasks like zone source selection, volume adjustment, and fire safety muting. Utilizing affordable CAT5 cables and RJ-45 connectors, these controllers can be wired up to 1000 ft, providing straightforward solutions for contractors.
The dbx ZonePRO 640m is a digital zone processor featuring six inputs, including four balanced mic/line switchable inputs and two unbalanced RCA input pairs, with configurable insert processing and hardware-controlled microphone gain. Its pre-configured architecture includes input processing, a central matrix, and output processing, with AutoWarmth maintaining full frequency bandwidth on each output zone.
The Zone Controllers enhance the DriveRack® and ZonePRO™ systems with nine units using analog DC voltage for controlling zone source selection, volume, muting, program or scene selection, and fire safety muting. Utilizing affordable CAT5 cables with RJ-45 connectors, they provide reliable control over distances up to 1000 ft, offering practical solutions for contractors.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our privacy policy.
