The NX1000D power amplifier packs 1000 Watts (2 x 500 Watts @ 2 Ohms; 2 x 300 Watts @ 4 Ohms; 1000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.5 lbs / 3.4 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX1000D is so much more efficient than conventional designs, it runs cooler and doesnt require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our Zero-Attack limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX1000D full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.
The NX3000D power amplifier packs 3000 Watts (2 x 1500 Watts @ 2 Ohms; 2 x 900 Watts @ 4 Ohms; 3000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.9 lbs / 3.6 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX3000D is so much more efficient than conventional designs, it runs cooler and doesnt require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our Zero-Attack limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX3000D full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.
The NX4-6000 power amplifier packs 6000 Watts (4 x 1600 Watts @ 2 Ohms; 2 x 3000 Watts @ 4 Ohms) into exceptionally lightweight (13.4 lbs / 6.1 kg) and rack-mountable packages. And because the NX4-6000 is so much more efficient than conventional designs, it runs cooler and doesnt require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our Zero-Attack limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX4-6000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.
The NX6000 power amplifier packs 6000 Watts (2 x 3000 Watts @ 4 Ohms; 2 x 1600 Watts @ 8 Ohms) into exceptionally lightweight (13 lbs / 5.9 kg) and rack-mountable packages. And because the NX6000 is so much more efficient than conventional designs, it runs cooler and doesnt require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our Zero-Attack limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.
The NX6000D power amplifier packs 6000 Watts (2 x 3000 Watts @ 4 Ohms; 2 x 1600 Watts @ 8 Ohms) into exceptionally lightweight (13.2 lbs / 6.0 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX6000D is so much more efficient than conventional designs, it runs cooler and doesnt require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our Zero-Attack limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000D full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.
The Eurocom SN2408 80-Watt Mixer and Dual Amplifier from Behringer is designed for continuous operation in distributed music, paging, and AV applications in bars, recreation facilities, conference rooms, hotels, and other venues. It is powered by two independent Class-D mono amplifiers with DC and thermal overload protection. The first amplifier has a high impedance output and can be set to either 70 or 100 volts. The second amplifier has a standard low-impedance output.
The Ultrabass BXD15 700W 1×15″ Bass Combo Amplifier from Bugera is a Class D combo bass amplifier capable of up to 700 watts of output power. It features A 15-inch speaker and employs Bugera’s Dynamizer technology to provide parallel-style compression to your playing to help control your dynamics. The BXD15 has an FX loop that allows you to integrate stompbox or rack effects into the rig. Additionally, the amp has a switchable tuner output that can also serve as a live monitor feed. The amp can be used both live and in the studio, thanks to its balanced DI XLR output.
The Ultrabass BXD15A 700W 1×15″ Bass Combo Amplifier from Bugera is a Class D combo bass amplifier capable of up to 700 watts of output power. It features a 15-inch aluminum-cone speaker, and employs Bugera’s Dynamizer technology to provide parallel-style compression to your playing to help control your dynamics. The BXD15A has an FX loop that allows you to integrate stompbox or rack effects into the rig. Additionally, the amp has a switchable tuner output that can also serve as a live monitor feed. The amp can be used both live and in the studio, thanks to its balanced DI XLR output.
The Vintage V55HD Infinium 55W 2-Channel Tube Guitar Amplifier Head from Bugera is a hand-built 2-channel, 55-watt guitar tube amplifier that is designed to provide you tonal options ranging from blues to crunch. It has a three 12AX7 tube preamp section and is driven by a dual 6L6 output tube section. The V55HD Infinium has normal and bright inputs to cater to your instruments tone. Its built-in reverb and channel selection can be switched with the included footswitch.
The Vintage V55 Infinium 55W 2-Channel Guitar Combo Amplifier from Bugera is a hand-built 2-channel, 55-watt guitar tube combo amplifier that is designed to provide you tonal options ranging from blues to crunch. The combo amp has a Turbosound-designed 12-inch speaker that is powered by its dual 6L6 tube power section. Its 2-channel preamplifer features three 12AX7 tubes. The V55 Infinium has normal and bright inputs to cater to your instruments tone. Its built-in reverb and channel selection can be switched with the included footswitch.
The Boss Katana-110 Bass is a 10″ 60W combo bass amplifier with onboard Boss effects designed to deliver versatile tones for bassists in the studio and onstage. It features a 60W Class-AB amp driving a custom-designed 10″ woofer and high-frequency tweeter with an on/off switch. Choose between three distinctive preamp voices—Vintage, Flat, and Modern—each with it’s own identifiable character. Then, use the Shape switch to fine-tune the sound. Four independent FX sections and a comprehensive 4-band EQ are also provided for further tone sculpting.
Delivering the premium sound and features of its flagship combo cousin in a potent 100W amp head, the KATANA-Artist MkII Amplifier Head from BOSS is a versatile modeled amp head with Tube Logic technology for five amp characters and five variations, providing a total of 10 diverse tonal options. With three-way contour shaping, three-band global EQ, and a host of effects like gain boost, modulation, delay, and reverb, you get plenty of tools for sculpting the perfect guitar tone, and if that’s not enough, each of the eight storable tone settings has its own presence, master volume, and solo gain level knobs for quick adjustment.
The Cambridge Audio CXA81 Mk II is a refined 80 W per channel Class AB integrated amplifier that elevates the award-winning CXA81 with upgraded ESS Sabre DAC, re-engineered signal path, and premium components. Combining power, musicality, and connectivity—including USB Audio (up to 32-bit/384 kHz PCM & DSD256), aptX HD Bluetooth, balanced XLR, and optical/coaxial inputs—CXA81 Mk II reveals breathtaking clarity and authority in every performance.
The Cambridge Audio CXC v2 is a dedicated CD transport engineered for one job—reading your discs with exceptional accuracy. Its proprietary S3 Custom CD Servo™ delivers class-leading error correction and ultra-low jitter, feeding a pure digital signal (coaxial/optical) to your DAC or CXA-series amp for the best possible CD sound.
The Cambridge Audio CXN100 network player elevates your hi-fi with stunning sound powered by the ESS ES9028Q2M DAC and the StreamMagic Gen 4 module. With support for Spotify Connect, TIDAL Connect, Qobuz, Deezer, Chromecast built-in, AirPlay 2, Bluetooth, and Roon Ready, it’s a future-proof digital hub with a big hi-res display and upgradeable firmware.
