The JBL CSA2120 is a 2-channel installed sound power amplifier with 120W per channel at 4 or 8 ohms, featuring dual summing RCA and 3-pin Euroblock inputs, selectable limiter, 70Hz high-pass filter, and a 4-pin Euroblock output. It includes auto-standby, over-heat and low-voltage protection, rackmount kit, front-panel volume controls, and LED indicators, and operates on a switch-mode universal power supply.
The JBL Array Frame for SRX906LA is a lightweight and compact rigging system designed for the SRX900 Series line array. It supports both single-point and front-back suspension methods, and can be used with the VTX RC500 rotating clamp for suspending smaller SRX906LA arrays from standard trusses or pipes.
The JBL Array Frame for SRX910LA is a lightweight and compact rigging system designed for the SRX900 Series line array, supporting both single-point and front-back suspension methods. It can be used with the VTX RC500 rotating clamp for suspending smaller SRX906LA arrays from standard trusses or pipes.
The JBL CSA 1120Z Audio Amplifier (1x 120W) offers powerful and compact audio amplification for installed applications, utilizing a universal switch-mode power supply and Crown’s DriveCore technology. It supports 70/100V installations, includes RJ45 for CSR-V volume controls, and features mono sum RCA and Euroblock inputs. Outputs are via Euroblock connectors, with illuminated knobs for visual feedback, and operates on 100-240 VAC. The amplifier aligns with HARMAN’s GreenEdge initiative for environmental sustainability.
The JBL CSA 180Z Audio Amplifier (1x 80W) offers a compact and efficient solution for installed audio applications, featuring Crown’s DriveCore technology and a universal switch-mode power supply. It supports 70V and 100V installations, includes an RJ45 connector for CSR-V volume controls, and provides mono sum RCA, Euroblock inputs, and Euroblock outputs. Visual feedback is provided by illuminated knobs, and it operates on 100-240 VAC, 50/60 Hz, complying with HARMAN’s GreenEdge environmental standards.
The JBL CSA 240Z Audio Amplifier offers 2x 40W channels, using Crown’s DriveCore technology and a universal switch-mode power supply for efficient sound amplification. Ideal for 70 and 100V installations, it includes connections for CSR-V volume controls, mono sum RCA and Euroblock inputs, and Euroblock outputs. Illuminated knobs and a 100-240V AC universal power supply enhance usability, while meeting HARMAN’s GreenEdge standards.
The JBL CSM 14 Commercial Series Mixer features four inputs and one output, integrating technology from multiple Harman brands. Designed for applications in schools, hospitals, restaurants, and gyms, it includes Euroblock mic/line connectors, RCA inputs, and illuminated rings for volume, bass, and treble controls. The back panel has +27V phantom power and 70 Hz HPF switches. Additional features include RJ45 connectors for CSR-V in-wall controls (sold separately) and a universal power supply. Built to Harman’s GreenEdge standards, it is lightweight, space-saving, and RoHS compliant.
The black JBL AWC129 is a single all-weather passive coaxial loudspeaker designed for high-output, full-range sound reinforcement in various indoor and outdoor applications such as sports facilities, stadiums, fairgrounds, cruise ships, and background music/paging systems.Capable of up to 400W long-term power handling, it incorporates a 12″ Kevlar-reinforced woofer and a 1″ fluid-cooled high-frequency driver to produce a high maximum peak SPL of 128 dB and a wide frequency response of 55 Hz to 20 kHz (-10 dB). The coaxial speaker configuration yields a 90 by 90° dispersion pattern for consistent coverage. The paintable ABS enclosure boasts an IP56 rating for effective weather resistance and a sturdy steel grille backed with open-cell foam for additional protection. An integrated multi-tap transformer—configurable via a rear-panel tap selector—allows operation in 70/100V systems or 8-ohm low-impedance setups. A color-matched U-bracket is included for ease of installation.
The JBL AWC129 is a black all-weather passive coaxial loudspeaker featuring a 12″ Kevlar-reinforced woofer and a 1″ fluid-cooled high-frequency driver. It delivers 400W of long-term power handling with a frequency response of 55 Hz to 20 kHz and a peak SPL of 128 dB. Designed for indoor and outdoor use, it offers a 90×90° dispersion pattern and is housed in an IP56-rated paintable ABS enclosure with a sturdy steel grille. The speaker includes a multi-tap transformer for 70/100V systems or 8-ohm configurations and comes with a color-matched U-bracket for easy installation.
The JBL Base Plate for SRX906LA Arrays is an essential adapter for audio professionals, enabling the secure ground stacking of up to six SRX906LA line array speakers on compatible subwoofers, scaffolding, stages, or carts.
The JBL Base Plate for SRX910LA Arrays is an essential adapter frame for audio professionals, enabling the secure ground-stacking of up to four SRX910LA arrays on subwoofers or support structures. It features a rear angle selection bar with a range of -15° to +5°, and includes three M10 through-holes for permanent attachment.
The CBT1000E Extension enhances the CBT1000 line array column speaker by offering extended bass response, greater pattern control, and elevated sound output. Utilizing Constant Beamwidth Technologyâ„¢, this system ensures superior vertical coverage through advanced analog beamforming and amplitude tapering, avoiding the typical narrow vertical beaming and lobing of passive column speakers.
The CBT1000E Extension, when paired with a CBT1000 line array column speaker, enhances bass response, pattern control, and sound output levels by utilizing Constant Beamwidth Technology™ for superior and consistent vertical coverage.
The CBT 70JE-1 Extension is designed to enhance the performance of the CBT 70J-1 line array column speaker by delivering extended bass response, improved pattern control, and increased sound output. Utilizing Constant Beamwidth Technologyâ„¢, it offers superior vertical coverage and consistent pattern control, avoiding the narrow beaming and coverage gaps common in passive column speakers.
The Control 18C/T is a full-range ceiling speaker featuring a 200 mm high-tech cone driver and a 25 mm liquid-cooled soft-dome tweeter, housed in a UV-resistant, paintable baffle with a pre-attached blind-mount backcan for easy installation. Suitable for medium to high volume environments, it delivers high-quality sound for various settings including cafes, retail stores, airports, and educational facilities.
Hi! I'm here to help you learn more about JBL Professional 2-Channel Power Amplifier CSA2120 120W per Channel for Installed Sound. What would you like to know?
We Value Your Feedback
Help us improve your Innovatech experience—share your thoughts, suggestions, or concerns in the form below. It only takes a minute.
