2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.
The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.
Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.
The Laney Ironheart IRT SLS 300W Amp Head is a versatile and highly portable guitar amp head. It features 3 channels covering clean, rhythm and lead sounds. Two different power modes give a versatile range of power outputs from less-than 1 Watt up to 300 Watts, while the ECC83 preamp tube delivers real valve tones. The amp can be used silently without a cab and features improved cabinet emulations, making it ideal for studio use. This amp only weighs 3.5 KG so is the ideal “Fly Rig”, and will make touring and gigging an easy task.
The IRT412A has many design features to survive a life of gigging and touring. The solid plywood chassis is built to last, and finished in a rugged black tolex with metal corner protectors. Recessed side handles with comfortable bars enable easier transportation, whilst steel castors assist with moving this large cabinet to and from the stage. Everything about the design ensures longevity and reliability, and you can be sure the IRT412A will deliver its powerful tones night after night.
Hearing the guitar played through a 4 x 12 cabinet is a truly awe-inspiring experience; nothing quite matches it in terms of volume, spread of sound, and depth of tone. The IRT412A features 4 custom HH drivers to send your tone to the far side of the room and back again, and ensures you’ll cover your stage with a wall of sound. This cabinet is designed to work with the Ironheart range of amplifiers but will work equally well when paired with your favourite amp, giving you both punch and clarity in a durable, road-ready package.
Designed and engineered to compliment the L50H’s sonic output each L412 is manufactured from high-grade premium marine plywood and loaded with 4 12” Celestion G12 Heritage drivers which together deliver 120 RMS of great vintage tone.
Finished in the same Marine Blue/Beige livery as the L50H and the rest of the Lionheart range the L412 comes with castors as standard and a protective embroidered slipcover.
Quality speaker cabs from 1×12 to 2×12 to 4×12 quad boxes. Loaded with everything from greenback Celestions® to high quality Fane® speakers. Ibanez, Engl, Hiwatt, and Hughes and Kettner produce professional speaker cabs for all musicians.
The Laney LFR-112 is loaded with a 12” driver and a 1” compression driver for a Full Range Flat Response sound that is perfect for accurately amplifying a digital guitar modelling system. A 200-watt power amp gives you plenty of volume for stage use & rehearsals and, should you require more volume, the LFR-112 features a range of connections to get connected on stage. The 47kHz – 20Khz frequency response is perfect for digital modelling systems but the cabinet works equally as a traditional active speaker with line-in instruments such as keyboards.
The traditional guitar cabinet design of the LFR-112 means digital modelling users can get the classic look of a guitar back-line for the real experience of using a guitar amp. The tilt-back stand enables you to position the cab on stage for the optimum listening position. The LFR-112 also features a switchable front baffle illumination for a classy aesthetic.
The LFR-112 features an XLR DI output and a selection of speaker emulations, including 1×12, 4×12, or the standard FRFR response. This allows you to connect directly to a mixing desk or recording device without the need for a microphone – perfect for use on stage and in the studio. The combi jack/XLR input enables easy routing to different input types, while the AUX-in lets you playback music directly.
Lionheart represents everything we’ve learned through forty years of Laney tube heritage, distilled into a single ampilfier range. Designed to deliver the ultimate tone of a tube being pushed hard – warm and expressive, at an output level which can be used in everyday environments.
This twin channel, all tube amplifier features ‘Parallel single-ended’ Class A output from 4x EL84 matched tubes, providing 20 watts of rich tube power.
The L20H also features gold plated PCB’s and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned “Type 4” large spring line reverb for the classic guitar reverb sound.
Each L20H features a hand stamped ‘build number’ in the order they come off the Laney production line, and comes with a custom made ‘Lionheart’ dust cover.
The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.
The L20T-112’s all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.
The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.
The L20T-112 can sound either vintage or modern depending on how you use the preamp controls – back off the gain, wind up the master and you’re cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.
The Lionheart range is a significant amplifier in todays market offering serious tone that’s often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.
The Lionheart L50H’s BITE control tightens up the bottom end giving a clean and clear punchy sound, whilst the tone control works in a similar fashion to the Tone controls on your guitar except that it works uniquely on the other end of the amplification chain. Giving you the ability to control not only the overall top end response but also reduce the upper end harmonics on the output stage and preamplifier overdrive sounds. The Dynamics control allows you to control the Lionhearts low frequency response dialling clockwise gives a more extended low-end response. Dialling the Dynamics control counterclockwise tightens up the low-end response.
The L50H rear panel features an FX loop with Bypass/Insert/Side Chain operation modes with a level control, the footswitch socket as well as housing the Preamp Out/Power amp in sockets along with the speaker connections for 8 & 16 Ohm cabinets. Each Lionheart L50H features a hand stamped “build number” in the order they came of the production line. Designed and manufactured in the UK.
The L5T-112 is a 5 watt Single-Ended, Class ‘A’ tube combo loaded with a 12″ Celestion G12H 70th Anniversary driver to give the ultimate boutique guitar tone. Play through a Lionheart – it reacts to your touch. From the moment you strike a note you’re connected. Let the music flow through you – from your fingers to the guitar, through the amplifier to the beating heart of the speaker. You are one. You are Lionheart.
The L5T-112 features a chrome twin channel pre amp with a Bright switch, shared 3-band EQ, global Tone and Studio-quality Digital Reverb. Constructed from Marine Grade Plywood with retro banding strip and leather strap handle, the L5T-112 looks as good as it sounds.
Designed and engineered with pride in Great Britain, The Lionheart L5T-112 is a 5 watt, Single-Ended, Class ‘A’ guitar combo loaded with a 1 × 12 Celestion G12H 70th Anniversary driver, all designed to give the ultimate guitar tone.
With less of a emphasis on preamp distortion, with the L5T-112 you can hear and feel the power tubes clipping to breakup, giving a much richer harmonic content and a larger dynamic range. With the L5T-112 you can really feel and hear the differences in tone based on your picking technique.
If you have the Laney L20H, you won’t want to compromise that great Class A tone by using any old cabinet. Instead, why not get the matching Laney LT212 cabinet. Featuring 2x 12″ Celestion Heritage G12H Drivers and closed back construction, this cab gives thick, deep tones with growling bottom end power. This stylish and great sounding cab also features a folding tilt mechanism for optimum sound projection. Each LT212 features a hand stamped ‘build number’ in the order they come off the Laney production line, and comes with a custom made ‘Lionheart’ dust cover. At 19kg this cab will easily fit into your regular gigging rig.
The twin channel LV100 is Laney’s entry level LV amplifier. It has a 65 watt output section, independent EQ for each channel, footswitchable reverb, speaker out socket, “V” scoop, and VTS tone shaping. It also features the Laney Tube Emulation Circuitry. Laney – Power To The Music.
The LV300 features a pre-amp valve – housing Tube Fusion Technology in its hybrid design. Giving you that legendary Valve Mojo to the pre-amp drive tones! Plus another benefit of a hybrid design is a lack of weight – any model in the LV range can be loaded in and out of a car boot or van without fear of injury but is as tough as it needs to be to withstand the rigours of gigging!
V is more to these amps than just being in the word LiVe – each drive channel features a V switch. The V switch gives you an instantly scooped tone. The nice thing is that there is one per channel – giving you flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch – this feature globally boosts certain bass and upper mid frequencies whilst cutting some of the lower mid.
Finally, the digital reverb section with individual controls for the clean and the drive channels, a really nice user-friendly feature.
The rear panel of the LV300 features everything you need – simple series effects loops an extension speaker socket and a footswitch socket. Each model in the LV range comes supplied with a sturdy metal FS3 custom three way footswitch!
The LV300 is geared towards live performance. Loud. Stage worthy and refreshingly user friendly. Finished in a tough black tolex with large protective corners the LV300 will look as good as it first did gig after gig.
The Laney LX412A 4×12 speaker cab is loaded with a quartet of Laney custom speakers, together rated at 200W. It offers 8-ohm mono and 4-ohm stereo operation for added versatility. The angled baffle provides improved projection. And the rugged plywood construction, side handles, reinforced corners and rubber feet ensure it’ll withstand the rigors of the road.
The NEXUS N115 cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney’s Tuffstuff coating, the NEXUS N115 has been designed to be used in conjunction with the NEXUS-SL and SLS bass head.
The N115 is loaded with a LaVoce neodymium 15” driver plus a La Voce 1″ exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the NEXUS range, these Italian-designed speaker components are truly outstanding for bass.
The lightweight, heavy duty, plywood cabinet is then finished in Laney’s Tuffstuff: An incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigours of life on the road.
