The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.
One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.
The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.
One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.
The three-channel LV300H is a gig-ready head packed with features for live use. Guitarists know that tubes add warmth and character to most classic guitar sounds but tube amps can be heavy and more expensive. The LV300H preamplifier is therefore equipped with a real ECC83 tube to combine the practicality and portability of a solid-state amplifier with the benefits of tube tone. Each of the 2 Drive channels features a ‘V’ switch. This gives you an instantly scooped tone plus as there is one per channel it gives the flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch. On-board reverb provides ambiance to the amp tone and different reverb levels can be set to Clean and Drive sections.
The TI100 was born out of an exhaustive period of product development, hand in hand with Iommi at every stage, assessing and refining his sonic needs. The TI100 amp represents a significant advance in Ionni’s sonic identity whilst still retaining the aggressive tone that he is renowned for.The TI100 delivers 100 Watts RMS of full on metal guitar tone in a twin channel format. Each of the TI100s channels features a footswitchable Pre Boost which sits right at the front of the pre amp and functions in the same way as your favorite boost pedal on your pedal board works it does not increase the gain but boosts the signal hitting the first pre amp tube.The two channels on the TI100 are basically the same channels with no sonic difference between them. They have been labelled up as Rhythm and Lead purely for convenience. You can decide on the configuration of each channel.Each channel has independent Pre -Boost and Drive controls along with dedicated 3 band EQ a channel volume, an Enhance co.
The IRT412 custom-designed straight guitar cabinet is constructed from rugged plywood and loaded with 4 Custom 12” HH drivers handling 320 watts. Laney Amplification began in 1967 when Lyndon Laney, whilst playing in a local band, ‘The Band of Joy’ with John Bonham on drums and Robert Plant on vocals, turned his musical interest into amplifier construction. Initially working in his father’s garage. Lyndon Laney sought to design and build amplifiers with key ‘tonal’ characteristics that were unheard of at the time. Formed in 1967 by Lyndon Laney, Laney Amplification is a West Midlands based guitar and musical instrument amplifier manufacturer who were closely involved with Tony Iommi of Black Sabbath in the birth of the ‘Heavy Metal’ music genre. Since 1967, Laney Amplification has gone on from strength to strength and is now a multinational.
Designed and engineered in the Black Country, Great Britain, the Ironheart IRT412 is a standard-sized, straight guitar cabinet loaded with 4 x 12” HH drivers designed to deliver punch and clarity when used with any amplifier.
Constructed from rugged plywood the IRT412 is finished with black metal corners, black textured front fret, black basket weave Tolex, steel castors and comfortable side mounted bar handles the IRT412 cabinet is designed to survive a life on the road for years to come.
The LV412 cabinet is the ideal speaker enclosure for use with the LV range of Laney amplification. You’re able to drive 200 watts into the 4×12″ Celestion Rocket 50’s, and this particular cab is wired for 8 ohms. The LV412A has an angled front.
Celestion Rocket 50’s, and this particular cab is wired for 8 ohms. The LV412A has an angled front. The LV412 cabinet is the ideal speaker enclosure for use with the LV range of Laney amplification.
The LX412 -a rugged, performance ready 4 x 12” cabinet designed for the LX range. The LX412 is capable of handling 200 watts, which makes it ideal for gigs The LX range of solid-state electric guitar amplifiers offers legendary Laney guitar tone and reliability from practice room to stage. Designed and engineered in Great Britain, the LX412 delivers 200 Watts of power and is equipped with 4×12” custom-designed drivers The LX412 is built to withstand the rigors of the road but it is not difficult to carry around using the side mounted easy grab handles. Finished in a heavy-duty granite tolex and with steel corners protectors, your LX412 cabinet will be gigging for years to come.
The Laney LX120RT is a highly versatile twin combo, featuring a huge 120 watt output section that can drive into 4 ohms. The Laney LX120RT also features separate EQ for each channel, line out socket, FX loop, speaker output, CD input and onboard high quality reverb. With all these goodies under the hood, it really does deliver the goods. Specification Power: 120W Two channels Single input Speakers: 2×12″ HH Controls: 3-band EQ, drive, reverb, volume Built-in reverb FX loop Aux. input Output: 8 ohm, 1/4″ Dimensions: 17.83″ x 26.53″ x 10.74 Weight: 40.78 lb.
The LX range takes its design cues from the more aggressive side of life – dark & brooding. More than just practice amps, fitted with rugged metal grilles and tattoo graphics giving them looks and strength to be taken to the extreme. The LX65R packs a mean punch when it comes to gig worthy combos. It’s twin channel pre-amp covers all the bases from a tone point of view and it 1 x 12” Custom HH driver handles everything the 65 watts RMS output section throws at it whilst still remaining portable and easy to lug round in the boot of your car or back of the van. Featuring true twin channels – Clean and Distortion both switched by an optional FS2– each with its own independent 3 band EQ. The Distortion channel also feature switchable XTS tone shaping for even more extreme tonal options. Another cool feature is the on-board CD/MP3 input for playing along with your favourite band. This LXR model comes with on-board reverb as well as an FX loop, a headphone socket and finally a line out socket. Finished in a tough black Rolex and kick proof metal grille the LX generation will survive endless gigs onstage as well as the rigours of the road.
Delivering what feels like a living, breathing tone, the VC30 is 12″custom designed dynamic amp. The single channel has Hi and Lo inputs, footswitchable gain stages with own level control, 3-band EQ, and a bright switch. Also includes reverb, effects loop, and a footswitch.
The VC30-212 is a very dynamic amp and can be easily controlled by the pressure of your pick on the strings and many tones can be found between one and ten on your guitar’s volume knob. From a chiming bright clean sound to the vintage caress of the creamy overdrive, whether it is single coils or hum buckers, the VC30 delivers.
The VC’s clean channel is immediately impressive and lives up to its name remaining clean almost all the way to the maximum volume, when it begins to break up in the perfect pleasant way you only get from pushing an EL84 hard. Drive-wise the VC range has its roots in the bluesy side of things, but push the front end of the amp a little harder with a pedal and the gain really sings.
There’s nothing quite like the sound of a tube. That’s why the Laney LV200 features an ECC83 placed at just the right point in the signal path for that dynamic response to your playing that only a tube can give. Couple this with a 65 watt output stage to allow you to release your creativity without compromising volume. Laney – Power To The Music.
The Laney LX412A 4×12 speaker cab is loaded with a quartet of Laney custom speakers, together rated at 200W. It offers 8-ohm mono and 4-ohm stereo operation for added versatility. The angled baffle provides improved projection. And the rugged plywood construction, side handles, reinforced corners and rubber feet ensure it’ll withstand the rigors of the road.
The Laney TI412 4x12i speaker cab is voiced to match Tonys signature TI100 head _ a lethal combination, summed from the depths, specifically made to blow minds and melt faces.
The CUB12R houses a 12″ driver, giving it an increased volume and full rich valve tone. Looking at the preamp it’s clear that the CUB12R packs more into the amp than it’s smaller siblings. It features Gain, Treble, Middle, Bass, Volume, Tone and Reverb controls. The output section of the CUB12R is based around a pair of EL84 tubes giving it a more scooped tone than it’s smaller counterparts. Think smooth rich overdrive with bags of gain.
The CUB12R features two input sockets one-labeled 15W the other labeled less than one watt. Plug into the “less than one watt” and you get your great tube tone at a whisper. The less-than-one-watt option allows you to drive the power amp section really hard allowing you to really access the “dark art” tone of power amp distortion.
The CUB12R is a member of the CUB range which offers everyone the opportunity to experience the sound and feel of a good quality tube amp at what is an amazing price.
Laney Amplification began in 1967 when Lyndon Laney, whilst playing in a local band, ‘The Band of Joy’ with John Bonham on drums and Robert Plant on vocals, turned his musical interest into amplifier construction. Initially working in his father’s garage. Lyndon Laney sought to design and build amplifiers with key ‘tonal’ characteristics that were unheard of at the time. Formed in 1967 by Lyndon Laney, Laney Amplification is a West Midlands based guitar and musical instrument amplifier manufacturer who were closely involved with Tony Iommi of Black Sabbath in the birth of the ‘Heavy Metal’ music genre. Since 1967, Laney Amplification has gone on from strength to strength and is now a multinational company that continues to design ‘tone’ solutions to enable musicians of all playing
The Cub10 is driven by a pair of 6V6GT power tubes which deliver 10 watts of classic tube tone. Its 10″ speaker is custom-designed exclusively by HH. The Cub 10 houses a 10″ HH driver. HH have custom-designed the driver exclusively for Laney giving the perfect loudspeaker pairing to the amplifier.
Designed to make tube amps accessible to every player, the Cub10 is a Class A/B design and produces 10 watts RMS of power from a pre amp loaded with 2 ECC83’s and a pair of 6V6GT power tubes.
