The Digbeth DBV410-4 is designed for the bass player who demands a powerful and dynamic single compact cabinet set up. Loaded with 4×10” vintage-voiced HH Black Label series ceramic drivers, the DBV410-4 is designed to accentuate the impressive midrange punch and tone of the drivers working together in a tuned cabinet. It delivers superb top-end tone thanks to the 1” LaVoce Compression driver, and its warm vintage tone is at home on any stage or studio gig. The DBV410-4 matches with either the DB500H or DB200H Digbeth heads.
The Digbeth DBV810-4 is a classic stage ready cabinet, loaded with 8×10” vintage voiced HH Black Label series ceramic drivers. Designed to move some serious air, it generates a warm punchy vintage tone capable of filling the biggest stadiums. The DBV810-4 pairs beautifully with the DB500H, really punches your bass sound through the mix and, let’s face it, looks cool!
The DH80 is designed to deliver a wide variety of electronic percussion sounds at home, in the classroom or wherever you choose to use it. Its small footprint, hard hitting output and multiple inputs makes it a real winner in the classroom Practice has never been easier – the BLUETOOTH aux in allows you to stream tunes directly from your phone and practice to your hearts content whatever the time of day making use of the headphone socket.
The new IRONHEART 2 x 12″ combo – the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives – such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!
The Combo houses three sonically distinct channels: – Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone.
The IRT60-212’s Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.
The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature. On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp. It’s available where ever you are on the preamp and can be switched in or out via the supplied footswitch.
A standout feature of the IRT60-212 range is the WATTS control in the master section. This allows you to really screw down the output of the IRT60-212’s 2 x 6L6 output section, down to less than 1 watt! Great for getting the sound of a full -blown metal head at bedroom levels.
Combine this with a Dynamics control which tightens up you low end when you’re playing a full power and you have a great metal tone at whatever level you decide to play at.
The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.
The LX120RT packs a mean punch when it comes to gig worthy combos. It’s twin channel pre-amp covers all the bases from a tone point of view and it’s 2 × 12” HH drivers handle everything the 120 watts RMS output section throws at it whilst still remaining portable and easy to lug round in the boot of your car or back of the van.
The GH30R-112 combo gives something back to the modern guitar player that for too many years has been overlooked. In a world obsessed by pre-amp distortion, the dark art of power amp distortion has been lost – until now. The GH30R-112 delivers transparent, versatile classic rock tones with the ability to blend in the dynamic characteristic of pre-amp distortion and power amp distortion right there at your fingertips.
Loaded with a specially chosen Celestion V-Type driver the GH30R-112 delivers an impressive stage presence for such a compact combo. Both channels on the GH30R-112 produce the same tonal characteristic but how you set them up gives you the subtle difference that tone hounds dream about.
The Laney GS212IE 2×12 Cabinet is a closed back extension cabinet and delivers the bass, mid response and great sound you have come to expect from a Laney 2×12” cab. The GS212IE produces a huge sound which is a joy to hear. At the heart of the cab are 2 HH 12” drivers specifically designed by HH for Laney. The HH 12” drivers deliver the sweet-sounding tone that has been captured on thousands of recordings from a diverse range of notable players. The GS212IE produces a lovely warm low-end, a creamy rich vocal mid-range and a sparkling, beautifully detailed top-end and can be used whatever the style of music you choose to play. Designed to be partnered with any of the Laney range of guitar heads the GS212IE can happily be used as part of any good quality guitar rig. As with all Laney cabinets, the GS212IE features high quality fixtures such as metal corners and ergonomic top edge mounted grab handles and is designed to withstand the rigors of life on the road.
The Laney IRT15H-2 15W tube guitar amp head delivers a single Ironheart channel that’s flavored with 12AX7 (preamp) and EL84 (power amp) tubes. For when 15W is too much, there’s also a 1W guitar input. Other features include high-quality digital reverb, an FX loop with variable level control and a DI output.
The Laney Ironheart is a rack mountable Guitar amp that delivers 15w of tube driven tone but thats just half the story.
The real strength of this amp is when you start recording with it. It features a dummy load option which means you do not need to connect to a speaker cab to record you can silently record directly. It also features a built in USB interface that records the processed guitar and the clean direct signal which can then be re-recorded via the built in reamping feature.
This gives you great creative options and really makes this product stand out from others.
Check out our exclusive video below where Lee and Rob show and explain how reamping works with this amp.
The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.
One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.
The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.
One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.
The three-channel LV300H is a gig-ready head packed with features for live use. Guitarists know that tubes add warmth and character to most classic guitar sounds but tube amps can be heavy and more expensive. The LV300H preamplifier is therefore equipped with a real ECC83 tube to combine the practicality and portability of a solid-state amplifier with the benefits of tube tone. Each of the 2 Drive channels features a ‘V’ switch. This gives you an instantly scooped tone plus as there is one per channel it gives the flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch. On-board reverb provides ambiance to the amp tone and different reverb levels can be set to Clean and Drive sections.
The TI100 was born out of an exhaustive period of product development, hand in hand with Iommi at every stage, assessing and refining his sonic needs. The TI100 amp represents a significant advance in Ionni’s sonic identity whilst still retaining the aggressive tone that he is renowned for.The TI100 delivers 100 Watts RMS of full on metal guitar tone in a twin channel format. Each of the TI100s channels features a footswitchable Pre Boost which sits right at the front of the pre amp and functions in the same way as your favorite boost pedal on your pedal board works it does not increase the gain but boosts the signal hitting the first pre amp tube.The two channels on the TI100 are basically the same channels with no sonic difference between them. They have been labelled up as Rhythm and Lead purely for convenience. You can decide on the configuration of each channel.Each channel has independent Pre -Boost and Drive controls along with dedicated 3 band EQ a channel volume, an Enhance co.
The IRT412 custom-designed straight guitar cabinet is constructed from rugged plywood and loaded with 4 Custom 12” HH drivers handling 320 watts. Laney Amplification began in 1967 when Lyndon Laney, whilst playing in a local band, ‘The Band of Joy’ with John Bonham on drums and Robert Plant on vocals, turned his musical interest into amplifier construction. Initially working in his father’s garage. Lyndon Laney sought to design and build amplifiers with key ‘tonal’ characteristics that were unheard of at the time. Formed in 1967 by Lyndon Laney, Laney Amplification is a West Midlands based guitar and musical instrument amplifier manufacturer who were closely involved with Tony Iommi of Black Sabbath in the birth of the ‘Heavy Metal’ music genre. Since 1967, Laney Amplification has gone on from strength to strength and is now a multinational.
Designed and engineered in the Black Country, Great Britain, the Ironheart IRT412 is a standard-sized, straight guitar cabinet loaded with 4 x 12” HH drivers designed to deliver punch and clarity when used with any amplifier.
Constructed from rugged plywood the IRT412 is finished with black metal corners, black textured front fret, black basket weave Tolex, steel castors and comfortable side mounted bar handles the IRT412 cabinet is designed to survive a life on the road for years to come.
The LV412 cabinet is the ideal speaker enclosure for use with the LV range of Laney amplification. You’re able to drive 200 watts into the 4×12″ Celestion Rocket 50’s, and this particular cab is wired for 8 ohms. The LV412A has an angled front.
Celestion Rocket 50’s, and this particular cab is wired for 8 ohms. The LV412A has an angled front. The LV412 cabinet is the ideal speaker enclosure for use with the LV range of Laney amplification.
