Showing 481–495 of 3124 results
The Crown Audio DriveCore Install 2|2400N is a 2400W, 2-channel amplifier designed for advanced installed sound applications, featuring BLU Link network compatibility, digital inputs, built-in DSP, and channel-independent high- or low-impedance output. It includes monitoring indicators, networked control, and is rack-mountable with a 20A IEC power cord.
The DriveCore™ Install (DCi) series amplifiers are high-performance installation amplifiers utilizing proprietary DriveCore technology. Designed to meet the highest industry standards, these amplifiers offer system integrators advanced features and flexibility for contemporary sound applications. The DCi series is versatile, compact, and energy-efficient, providing 300W or 600W power points in 2-, 4-, or 8-channel configurations within a 2 Rack Unit form. This design allows for smaller infrastructure rooms, reducing operational costs while maximizing installation flexibility.
The Crown DriveCore Install DA Series amplifier offers a powerful solution for Dante or AES67 networked audio applications, featuring DriveCore® technology for optimal efficiency and superior audio quality. It includes high-powered DSP with JBL speaker tunings, supports various speaker loads (2/4/8/16 ohm, 70V, 100V), and allows network control and monitoring. The amp is compatible with Dante Domain Manager and is EN 54-16 compliant for life safety installations.
The Crown Audio DCI 4|1250ND is a versatile 4-channel, 1250W DriveCore Install AVB network display amplifier designed for complex modern sound installations. It offers analog and digital inputs, network monitoring, controllable GPIO ports, and on-board DSP, including EQs, delay, limiting, and matrix mixing. Producing up to 1250W per channel at various impedances, it features AVB technology for consistent audio delivery and is AVnu certified. The amplifier includes channel bridging options, selectable high/low-impedance output, front panel LCD for presets and DSP functions, and system indicators. It is energy-efficient with a remote control power system.
The Drive Core™ Install Series amplifiers from Crown offer high-performance, energy-efficient solutions based on DriveCore technology, ideal for professional and commercial sound applications. Available in 2-, 4-, and 8-channel configurations at 300W or 600W, these compact amplifiers come in a 2 Rack Unit form factor, providing versatile installation options and reducing operational costs while maintaining superior quality.
The Crown DCi 4/300DA DriveCore Install DA Series is a 4-channel power amplifier featuring Dante/AES67 networked audio, integrated DSP, and 300W output per channel for 2-, 4-, 8-, and 16-Ohm speakers or 70/100Vrms systems. It supports bridged channels for higher power applications like subwoofers and offers advanced configuration and monitoring via HiQnet protocols and Audio Architect software. The amplifier includes LevelMAX limiting, input compression, and EQ, with additional connections for redundancy and GPIO port for external control.
The Crown Audio DCI 4|300N is a 300W DriveCore Install 4-channel BLU Link network amplifier, ideal for system integrators working on sophisticated installed sound applications. It features analog and digital inputs, network monitoring/control, programmable GPIO ports, onboard DSP, and is EN 54-16 compliant. This 2 RU amplifier outputs up to 300W per channel at various impedances and supports 70/100 Vrms. It integrates with Harman’s BLU Link for digital audio transport and includes DSP functionalities like limiting, EQ, delay, and a matrix mixer for enhanced performance and reliability.
The Crown DriveCore Install DA Series amplifiers, designed for Dante and AES67 networked audio, offer flexible speaker load handling and multiple channel counts, powered by proprietary DriveCore® technology for high efficiency and audio quality. These amplifiers include a powerful DSP with JBL speaker tunings, network control and monitoring, and support 2/4/8/16 ohm, 70V, and 100V loads, making them ideal for installations using Dante Domain Manager for networked audio management.
The Crown Audio DCI 4|600N is a versatile 4-channel, 600W amplifier designed for modern installed sound applications. It features analog and digital inputs, network monitoring, programmable GPIO ports, and on-board DSP. Compliant with EN 54-16 for life safety systems, it delivers up to 600W per channel at varying impedances and integrates with Harman’s BLU Link for seamless digital audio transport. The amplifier includes advanced DSP capabilities, recallable presets, and secondary input setups. Rear-panel DIP switches allow easy configuration for different outputs, while independent attenuators provide precise control over each channel.
The DCI 4/600 DriveCore Install Analog Series from Crown Audio is a 4-channel amplifier delivering 600 watts per channel, compatible with 2, 4, 8, 16 Ohms, or 70/100 Vrms. It features channel bridging for high-power applications, selectable high/low impedance outputs, and independent attenuators per channel. The front panel includes indicators for level, signal, readiness, clip, thermal, and fault states. It supports system integration for control, energy-saving sleep mode, is 2U rackmountable, and includes 4 male connectors and an IEC power cord.
The DriveCore™ Install series amplifiers utilize proprietary DriveCore technology, offering high performance for demanding sound installations. These amplifiers are engineered to the highest industry standards, providing system integrators with advanced features and flexibility. The DCi Series continues Crown’s legacy in professional and commercial power amplifier technology with its versatile, compact, and energy-efficient design.
The DSi-Series MA4 is a 700W 4-channel power amplifier designed for JBL cinema loudspeakers, delivering high-quality performance in a rack-mountable form. It features 96 kHz/32-bit digital signal processing, DriveCore technology, and supports high power output at 2 ohms. The amp includes four analog inputs, an LCD panel for easy configuration, and integrates with HARMAN Audio Architect via HiQnet. It offers tailored tuning presets for JBL speakers, ensuring optimal cinema sound quality and easy setup.
The DSi-Series MA4-D is a 700W 4-channel power amplifier designed for JBL cinema loudspeakers, featuring 96 kHz/32-bit DSP, DriveCore technology, and a range of advanced audio processing tools. Housed in a rack-mountable enclosure, it supports high power output at 2 ohms, built-in cinema speaker tuning presets, and integrates seamlessly with HARMON Audio Architect control software and DANTE/AES67 interfaces.
The Crown DSi 8Mn is a digital cinema projection booth monitor designed for use with Crown DSi Series amplifiers, featuring remote-level and remote-audio monitoring capabilities, network monitoring for quality control, eight-channel monitoring, front-panel and web browser controls, balanced inputs and outputs, universal power supply, and includes a power cord.
The Crown Audio DSi-6000 2-Channel Solid-State Power Amplifier features presets for JBL loudspeaker systems, an intuitive LCD for easy setup, a USB connection for configuring HiQnet System Architect software, onboard DSP with crossovers, EQ filters, delay, output limiting, and a rear-panel HD-15 connector for DSi-8M System Monitor connectivity. Its switch-mode universal power supply offers excellent power flexibility.
We care about your privacy
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our privacy policy.
Don't have an account yet? Sign up
No items in your cart. Go on, fill it up with something you love!
Start Shopping NowHelp us improve your Innovatech experience—share your thoughts, suggestions, or concerns in the form below. It only takes a minute.
