The Neumann U 67 Set is a nickel-finished large-diaphragm tube condenser microphone that faithfully recreates the classic U 67, favored by vocalists, musicians, and recording engineers. It features the K 67 capsule, BV 12 output transformer, and EF86 tubes for optimal sound quality. With three polar patterns (omnidirectional, cardioid, and figure-8), a -10 dB pad enhancing maximum SPL to 124 dB, and a 20 Hz to 20 kHz frequency response adjustable via a low-cut filter, it offers versatile miking options for a variety of recording scenarios.
The Neumann LH 36 Titling Adapter for Monitor allows flexible mounting of monitors on stands or ceilings, facilitating tilt adjustments up to 18° (or 13° for the 0 500 C Digital Monitor). Equipped with a M20 thread for ceiling installation and dual M8 threads, it is compatible with various accessories including tripod stand adapter (LH 28), TV-Spigot (LH 29), mounting flange adapter (LH 37), base plate (LH 41), ceiling system adapter (LH 42), and tripod adapter plate (LH 48).
The Neumann MA 1 Monitor Alignment Microphone and Calibration System is designed for accurate and consistent mixes with Neumann KH 80 DSP and non-DSP KH-Series monitors using the KH 750 DSP subwoofer. It includes an omnidirectional mic and software for Mac/Windows to calibrate speaker phase and amplitude, compensating for room imperfections. The system involves connecting monitors to an audio interface, using a network switcher for DSP-based models, and calibrating with the included mic and software. An SG105 mic clip is also provided.
The Neumann Monitor Alignment Kit 2 includes two KH 80 DSP studio monitors and an MA 1 measurement microphone, offering a precisely tuned listening system for your studio. Developed with Fraunhofer IIS, the included calibration software creates a room-specific profile to handle frequency, time-alignment, and amplitude issues. Optimize your KH-series stereo monitoring setup for critical listening, mixing, and post-processing with this comprehensive kit.
The Neumann Monitor Alignment Kit 1 includes a KH 750 DSP-powered 10″ subwoofer and an MA 1 measurement microphone, designed for use with KH 80 DSP or non-DSP KH-Series monitors. With Neumann’s calibration software developed with Fraunhofer IIS, the kit creates room-specific profiles to correct frequency, time-alignment, and amplitude issues for optimized stereo monitoring in any studio environment.
The Neumann NDH 20 Headphones are engineered for tracking, mixing, and critical listening with a closed-back, circumaural design. Featuring 38mm drivers with high-gauss neodymium magnets, these headphones deliver accurate sound without distortion or color, offering a frequency response of 5 Hz to 30 kHz. They are crafted to minimize midrange resonances for precise mixing, providing a sonic experience akin to Neumann’s studio loudspeakers.
The NRC 1 Remote Control for Sound System Volume by Neumann is a straightforward hardware solution for managing system volume, LFE gain, and bass management bypass. Ideal for use with KH 810 and KH 870 active studio subwoofers, this unit requires a separately purchased Neumann remote cable.
The REK 4 Remote Electronics Kit enables the electronics panel to be positioned up to 30 meters away from the loudspeaker cabinet, facilitating better heat management, easier control adjustments, and simpler servicing. The kit includes an 8-pole Speakon cable for driver signals and a CAT-5 cable for display signals, both designed to optimize space by facing downwards when installed. It supports 2.5 mm² wire for up to 20 meters and 4 mm² wire for up to 30 meters to ensure reliable performance.
This kit enables the placement of an electronics panel up to 30 meters (90 feet) away from the loudspeaker cabinet, requiring a standard 4-pole Speakon-terminated loudspeaker cable (not included).
The Neumann SEA 1 Subwoofer EtherCon Adapter facilitates the connection of up to 3 subwoofers to a single remote control, compatible with SRC 1, SRC 2, or any RS-232 data source. For larger systems, additional adapters are needed. The compact and durable design, featuring ABS plastic and aluminum housing, includes 4 Neutrik EtherCon RJ45 connectors for seamless system integration.
The Neumann TLM 103 sets new standards in microphone performance with an exceptionally low self-noise of 7 dB-A, high sensitivity of 23 mV/Pa, and the ability to handle sound pressure levels up to 138 dB. Its transformerless output stage delivers an uncolored, true-to-original sound with a clear and powerful bass response, making it ideal for capturing anything from soft whispers to loud bass drums without noise or distortion.
The KH 120 D studio monitor is a versatile near-field loudspeaker, also usable as a rear speaker in larger setups, thanks to its advanced acoustic and electronic simulation technologies. It features a Mathematically Modeled Dispersion waveguide, flexible acoustic controls, analog class-AB amplifiers, and multiple input formats, making it suitable for various acoustic conditions and locations. Ideal for tracking, mixing, and mastering in music, broadcast, project, and post-production studios.
The KH 420 is a three-way tri-amplified monitor featuring 330 W and two 140 W Class AB amplifiers with thermal protection. Its Mathematically Modeled Dispersion™ (MMD™) waveguide ensures precise horizontal sound distribution, enhancing listening flexibility, and narrower vertical dispersion to minimize reflections from surroundings. Ideal for midfield and main monitoring in various studio settings, the KH 420 integrates seamlessly into multi-channel systems alongside other Neumann monitors.
The Neumann Monitor Alignment Kit 3 equips your studio with two KH 80 DSP studio monitors, a KH 750 DSP subwoofer, and an MA 1 measurement microphone, all optimized through Neumann’s calibration software developed with Fraunhofer IIS to address frequency, time-alignment, and amplitude issues for precise monitoring.
