The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.
Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.
The Laney Ironheart IRT SLS 300W Amp Head is a versatile and highly portable guitar amp head. It features 3 channels covering clean, rhythm and lead sounds. Two different power modes give a versatile range of power outputs from less-than 1 Watt up to 300 Watts, while the ECC83 preamp tube delivers real valve tones. The amp can be used silently without a cab and features improved cabinet emulations, making it ideal for studio use. This amp only weighs 3.5 KG so is the ideal “Fly Rig”, and will make touring and gigging an easy task.
High quality construction and a 1×12-inch HH Custom Driver make this the ultimate cab for your low to mid-powered amp! Laney designed the IRT112 cab to compliment the IRT models sonic output. Fitted with ergonomic side grab handles and light enough to be carried from gig to gig with no strain. The 12 inch Custom HH-designed speaker provides 80W Power handling.
The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.
One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.
The Laney IRT15H-2 15W tube guitar amp head delivers a single Ironheart channel that’s flavored with 12AX7 (preamp) and EL84 (power amp) tubes. For when 15W is too much, there’s also a 1W guitar input. Other features include high-quality digital reverb, an FX loop with variable level control and a DI output.
The IRT412 custom-designed straight guitar cabinet is constructed from rugged plywood and loaded with 4 Custom 12” HH drivers handling 320 watts. Laney Amplification began in 1967 when Lyndon Laney, whilst playing in a local band, ‘The Band of Joy’ with John Bonham on drums and Robert Plant on vocals, turned his musical interest into amplifier construction. Initially working in his father’s garage. Lyndon Laney sought to design and build amplifiers with key ‘tonal’ characteristics that were unheard of at the time. Formed in 1967 by Lyndon Laney, Laney Amplification is a West Midlands based guitar and musical instrument amplifier manufacturer who were closely involved with Tony Iommi of Black Sabbath in the birth of the ‘Heavy Metal’ music genre. Since 1967, Laney Amplification has gone on from strength to strength and is now a multinational.
Designed and engineered in the Black Country, Great Britain, the Ironheart IRT412 is a standard-sized, straight guitar cabinet loaded with 4 x 12” HH drivers designed to deliver punch and clarity when used with any amplifier.
Constructed from rugged plywood the IRT412 is finished with black metal corners, black textured front fret, black basket weave Tolex, steel castors and comfortable side mounted bar handles the IRT412 cabinet is designed to survive a life on the road for years to come.
The IRT412A has many design features to survive a life of gigging and touring. The solid plywood chassis is built to last, and finished in a rugged black tolex with metal corner protectors. Recessed side handles with comfortable bars enable easier transportation, whilst steel castors assist with moving this large cabinet to and from the stage. Everything about the design ensures longevity and reliability, and you can be sure the IRT412A will deliver its powerful tones night after night.
Hearing the guitar played through a 4 x 12 cabinet is a truly awe-inspiring experience; nothing quite matches it in terms of volume, spread of sound, and depth of tone. The IRT412A features 4 custom HH drivers to send your tone to the far side of the room and back again, and ensures you’ll cover your stage with a wall of sound. This cabinet is designed to work with the Ironheart range of amplifiers but will work equally well when paired with your favourite amp, giving you both punch and clarity in a durable, road-ready package.
The new IRONHEART 2 x 12″ combo – the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives – such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!
The Combo houses three sonically distinct channels: – Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone.
The IRT60-212’s Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.
The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature. On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp. It’s available where ever you are on the preamp and can be switched in or out via the supplied footswitch.
A standout feature of the IRT60-212 range is the WATTS control in the master section. This allows you to really screw down the output of the IRT60-212’s 2 x 6L6 output section, down to less than 1 watt! Great for getting the sound of a full -blown metal head at bedroom levels.
Combine this with a Dynamics control which tightens up you low end when you’re playing a full power and you have a great metal tone at whatever level you decide to play at.
The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.
The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.
One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.
The Laney Ironheart is a rack mountable Guitar amp that delivers 15w of tube driven tone but thats just half the story.
The real strength of this amp is when you start recording with it. It features a dummy load option which means you do not need to connect to a speaker cab to record you can silently record directly. It also features a built in USB interface that records the processed guitar and the clean direct signal which can then be re-recorded via the built in reamping feature.
This gives you great creative options and really makes this product stand out from others.
Check out our exclusive video below where Lee and Rob show and explain how reamping works with this amp.
Lionheart represents everything we’ve learned through forty years of Laney tube heritage, distilled into a single ampilfier range. Designed to deliver the ultimate tone of a tube being pushed hard – warm and expressive, at an output level which can be used in everyday environments.
This twin channel, all tube amplifier features ‘Parallel single-ended’ Class A output from 4x EL84 matched tubes, providing 20 watts of rich tube power.
The L20H also features gold plated PCB’s and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned “Type 4” large spring line reverb for the classic guitar reverb sound.
Each L20H features a hand stamped ‘build number’ in the order they come off the Laney production line, and comes with a custom made ‘Lionheart’ dust cover.
The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.
The L20T-112’s all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.
The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.
The L20T-112 can sound either vintage or modern depending on how you use the preamp controls – back off the gain, wind up the master and you’re cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.
The Lionheart range is a significant amplifier in todays market offering serious tone that’s often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.
Designed and engineered to compliment the L50H’s sonic output each L412 is manufactured from high-grade premium marine plywood and loaded with 4 12” Celestion G12 Heritage drivers which together deliver 120 RMS of great vintage tone.
Finished in the same Marine Blue/Beige livery as the L50H and the rest of the Lionheart range the L412 comes with castors as standard and a protective embroidered slipcover.
Quality speaker cabs from 1×12 to 2×12 to 4×12 quad boxes. Loaded with everything from greenback Celestions® to high quality Fane® speakers. Ibanez, Engl, Hiwatt, and Hughes and Kettner produce professional speaker cabs for all musicians.
The Lionheart L50H’s BITE control tightens up the bottom end giving a clean and clear punchy sound, whilst the tone control works in a similar fashion to the Tone controls on your guitar except that it works uniquely on the other end of the amplification chain. Giving you the ability to control not only the overall top end response but also reduce the upper end harmonics on the output stage and preamplifier overdrive sounds. The Dynamics control allows you to control the Lionhearts low frequency response dialling clockwise gives a more extended low-end response. Dialling the Dynamics control counterclockwise tightens up the low-end response.
The L50H rear panel features an FX loop with Bypass/Insert/Side Chain operation modes with a level control, the footswitch socket as well as housing the Preamp Out/Power amp in sockets along with the speaker connections for 8 & 16 Ohm cabinets. Each Lionheart L50H features a hand stamped “build number” in the order they came of the production line. Designed and manufactured in the UK.
The L5T-112 is a 5 watt Single-Ended, Class ‘A’ tube combo loaded with a 12″ Celestion G12H 70th Anniversary driver to give the ultimate boutique guitar tone. Play through a Lionheart – it reacts to your touch. From the moment you strike a note you’re connected. Let the music flow through you – from your fingers to the guitar, through the amplifier to the beating heart of the speaker. You are one. You are Lionheart.
The L5T-112 features a chrome twin channel pre amp with a Bright switch, shared 3-band EQ, global Tone and Studio-quality Digital Reverb. Constructed from Marine Grade Plywood with retro banding strip and leather strap handle, the L5T-112 looks as good as it sounds.
Designed and engineered with pride in Great Britain, The Lionheart L5T-112 is a 5 watt, Single-Ended, Class ‘A’ guitar combo loaded with a 1 × 12 Celestion G12H 70th Anniversary driver, all designed to give the ultimate guitar tone.
With less of a emphasis on preamp distortion, with the L5T-112 you can hear and feel the power tubes clipping to breakup, giving a much richer harmonic content and a larger dynamic range. With the L5T-112 you can really feel and hear the differences in tone based on your picking technique.
