The Focusrite Clarett+ 2Pre is a 10×4 USB Type-C audio/MIDI interface designed for studio and mobile use, featuring 24-bit/192 kHz AD/DA conversion, low-latency monitoring, and two Air-enabled mic preamps that can emulate the classic ISA preamps. It includes two mic/line/instrument inputs, an optical port for ADAT or S/PDIF expansion, MIDI I/O, four line-level outputs, and a stereo headphone out. The included software package offers Focusrite Red plug-ins, a channel strip, and Focusrite Control for routing and monitoring on various devices.
The Focusrite Clarett+ 4Pre is an 18×8 USB Type-C audio/MIDI interface designed for studio and mobile use, featuring upgraded 24-bit/192 kHz AD/DA conversion, low-latency monitoring, and four Air-enabled mic preamps that emulate classic ISA preamp sounds. It includes four mic/line preamps with Hi-Z capability, rear-panel line inputs, an ADAT port, S/PDIF stereo digital I/O, and MIDI I/O. Four line-level outputs and two stereo headphone outputs allow versatile connections. The package comes with Focusrite Red plug-ins and Control software for intuitive routing and monitoring.
The Focusrite Clarett+ 8Pre is a versatile 18×20 USB Type-C audio/MIDI interface with upgraded 24-bit/192 kHz AD/DA conversion, eight Air-enabled mic preamps, and low-latency monitoring. Ideal for studio or mobile setups, it includes ADAT, S/PDIF, and MIDI I/O, stereo monitor outputs, two headphone outs, and eight line outputs. The high-performance preamps offer low noise and dynamic range for clear sound reproduction. It comes with Focusrite Red plug-ins, a channel strip, and Focusrite Control software for comprehensive configuration on various devices.
The Focusrite Clarett+ OctoPre enhances your audio setup with eight additional mic pres, eight line outputs, and 24-bit / 192 kHz AD/DA conversion via ADAT. It boasts high-dynamic-range converters, ultralow distortion, and mic pres with switchable impedance and transformer-resonance effects. Front-panel inputs cater to high-output sources like electric guitars, with XLR-1/4″ combination jacks on the rear. Each input offers a 118 dB dynamic range and features insertion points for external processors.
The Focusrite ISA428 MkII is a versatile four-channel microphone preamp with transformer-based preamps, selectable input impedance, and direct instrument inputs. It offers an optional eight-channel analog to digital conversion with high-quality Burr-Brown amplifiers. Known for delivering transparent audio with subtle warmth, it features a broad frequency response and variable impedance for optimal microphone matching. An included Brainworx bx_console Focusrite SC channel-strip plug-in emulates the rare Focusrite Studio Console for a professional sound.
The Focusrite Pro ISA 828 MkII is an eight-channel microphone preamp that offers high-end sound quality with mic, line, and instrument connections. It features an updated power supply for efficient power consumption, compatibility with Dante networks via an optional card, and a Lundahl LL1538 input transformer for vintage sound. The preamp provides a variable impedance circuit and has a gain range of 80 dB, making it suitable for low-output dynamic and ribbon microphones.
The Focusrite Pro ISA ADN2 is a two-channel A-D card designed for the ISA One mic preamp and DI, offering high-quality analog-to-digital conversion at up to 24-bit/192 kHz. It features S/PDIF, AES3, Dante, and ADAT connectivity, with routing managed via Dante Controller and settings monitored through RedNet Control. The card includes RJ45 Dante output ports, XLR AES3 output, TOSLINK ADAT output, and RCA S/PDIF output. It also provides Word Clock I/O on BNC connectors for synchronization with multiple digital sources and networked devices.
The Focusrite Pro ISA ADN8 is an eight-channel A-D card designed for high-quality analog-to-digital conversion in the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps, with support for sample rates up to 24-bit / 192 kHz. It includes AES3, Dante, and ADAT connectivity, allowing network integration with Focusrite RedNet devices and other Dante-enabled equipment. The card features primary and secondary RJ45 Dante output ports, an AES59 DB25 connector, TOSLINK connectors for ADAT output, and Word Clock I/O on BNC connectors for synchronization.
The ISA One from Focusrite is a single-channel, transformer-based microphone preamp, inspired by the original ISA 110. It includes the Lundahl L1538 transformer and a custom Zobel network, with switchable input impedance, line input on XLR and 1/4″ TRS jacks, a dedicated DI channel, and optional analog-to-digital conversion. Additional features include phantom power, phase reverse, insert point, and a high-pass filter.
The ISA Two from Focusrite is a dual mono microphone preamp that features transformer-based mic inputs with variable impedance, derived from the renowned Forte and Studio console designs. It delivers up to 80 dB of gain and includes two front-panel instrument inputs for direct access to high-fidelity DIs. Utilizing Lundahl LL1538 transformers with low leakage inductance and an extended frequency response, the preamp ensures high audio quality. Each channel has a balanced insert point for integrating external processors. Additionally, the package includes the Brainworx bx_console Focusrite SC plug-in, digitally emulating the rare Focusrite Studio Console.
The third-generation Focusrite Scarlett 18i20 is an 18×20 USB audio/MIDI interface designed for bands, project studio engineers, and panel podcasters, offering top-shelf sound with mix-minus functionality in a user-friendly, rack-friendly format, ensuring pro-level tone with minimal learning curve.
The Focusrite Scarlett 18i8 3rd Gen is an 18×8 USB audio/MIDI interface designed for podcasters, producers, and small bands, offering mix-minus functionality and pro-level sound quality. It features four improved Scarlett mic preamps with phantom power, input pads, and an Air circuit. The front panel includes software-switchable XLR-1/4″ combo inputs for versatile connectivity, while the rear panel provides additional fixed-level inputs for line-level sources.
The third-generation Focusrite Scarlett 2i2 2×2 USB audio interface provides high-quality sound in a compact, portable design, ideal for singer-songwriters, guitarists, and podcaster duos seeking professional-level tone with ease of use, wherever they are.
The Focusrite Scarlett 2i2 Studio third-generation recording package includes a Scarlett 2i2 USB audio interface, a large-diaphragm cardioid condenser microphone, closed-back headphones, an XLR microphone cable, and a software bundle, allowing you to easily record high-quality vocals and guitar at home or on the go.
The Focusrite Scarlett 4i4 3rd Gen is a 4×4 USB audio/MIDI interface designed for podcasters, singers, and musicians, offering mix-minus functionality for call handling and high-quality sound in a portable, desk-friendly format.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our privacy policy.
