The BSS BLU-10 is a black touchscreen controller that builds on the original Soundweb 9010, offering an advanced control solution that can replace pricier alternatives for simpler interfacing needs. It supports up to 100 customizable control pages with password-protected access and can house up to eight functions per page, enhancing control over Soundweb London DSP parameters without requiring page transitions for navigation.
The BLU-120 processor, configurable via HiQnetâ„¢ Audio Architect, employs a simple drag-and-drop configuration method with a low-latency, fault-tolerant 256-channel digital audio bus using Category 5e cabling for 100m range, extendable to over 40km with fiber optic converters. It features four card slots that support various I/O configurations, including Analog and Digital Input/Output Cards, AEC Input, and Telephone Hybrid Cards, each supporting four channels. Additional capabilities include software configurable gain and Phantom Power for Analog Inputs, and AES/EBU and S/PDIF processing for Digital cards, with extensive clocking and syncing options.
The Soundweb London BLU-320 is a configurable audio processor featuring flexible I/O options, CobraNet audio with fault tolerance, and a high bandwidth digital audio bus. It offers control via HiQnet London Architect with an intuitive drag-and-drop interface and supports 256 channels of low latency digital audio over standard Category 5e cabling, with optional fiber optic conversion for extended distances.
The Soundweb London BLU-BIB, also known as the “break-in box,” provides 8 channels of analog audio input expansion via a high bandwidth, fault-tolerant digital audio bus. This low-latency expander supports 256 channels using standard Category 5e cabling, allowing for distances up to 100 meters between compatible devices.
The Soundweb London BLU-BOB1 “break-out box” provides 8 channels of analog audio output expansion through a high bandwidth, fault-tolerant digital audio bus. It features a digital audio bus with 256 channels, low latency, and uses Category 5e cabling for up to 100 meters between devices. The 8 analog outputs use terminal block connectors similar to other Soundweb London products.
The BSS BLU-SI card offers a seamless 32 x 32 interface integration between Soundcraft Si Series consoles and the BLU Link digital audio bus, supporting connection with various Harman products including the BSS London BLU 800, dbx® PMC, and Crown® PIP-BLU interfaces. It facilitates 256-channel, low latency, fault-tolerant audio transmission over 100 meters using standard CAT 5e cabling.
The BLU-160 boasts versatile capabilities with software configurable Analog Input Cards offering gain adjustment in 6dB steps and selectable Phantom Power, along with Digital Input and Output Cards supporting AES/EBU and S/PDIF audio formats and diverse clocking options. Users can effortlessly monitor power, sync, signal, and clip status through front panel LEDs, while detailed device specifics are displayed on the front panel screen. Integration with external systems is simplified via 12 Control Inputs and 6 Logic Outputs, and comprehensive documentation through the Soundweb London Interface Kit is included in the HiQnet Audio Architect installation.
The Soundweb London BLU-800 is a versatile audio processor featuring configurable I/O, signal processing, and CobraNet audio. It offers open architecture, fully configurable through HiQnetâ„¢ Audio Architect, and includes a digital audio bus supporting 256 channels over Cat 5e cabling, with fiber optic options extending connectivity up to 40km. Four card slots support various I/O configurations with six available card types, making it ideal for complex audio network setups.
The Soundweb London Analog Input Card is compatible with multiple Soundweb London devices, including BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32, and BLU-16, and allows these devices to receive microphone or line level signals through its four configurable card slots.
The Soundweb London BLU-GPX is a versatile network-controlled GPIO expander with 36 Control Inputs, 23 Logic Outputs, and 8 integrated Relay Outputs, designed to enhance analog control and interfacing capabilities in systems. It features PoE-enabled Ethernet ports, a 12VDC power connector, RS-232 compatibility, and user-configurable front panel components including LEDs, an LCD, and a piezo buzzer.
The Soundweb London Digital Output card fits into any of the four card slots on the BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32, and BLU-16 devices, enabling them to receive AES/EBU and S/PDIF audio signals.
The 9012 hardware controller is designed for straightforward installations requiring volume and source selection. It features a rotary fader and a five-position switch that connect to the control ports on Soundweb 9088 or 9000 devices. Users can map controls in Soundweb Designer for additional functionalities. The 9012 package includes multi-purpose labels in English, French, German, and Spanish.
The BLU-6 is a versatile wall-mounted controller, suited for level control, source selection, and preset recall. Compatible with BLU-16, BLU-32, and BLU-80 devices, it features an eight-way switch and up/down buttons, allowing consistent audio level adjustments. The switch functions can be customized with direct marking or self-adhesive labels.
