The AC-5S is a specialized controller designed for Soundweb London devices, utilizing a five-position resistor ladder primarily for source selection or preset recall. Each AC-5S connects to one of the General Purpose Inputs (GPI), with Soundweb London devices supporting up to 12 controllers, and the BLU-GPX model accommodating up to 36. Configured using HiQnet software, the AC-5S offers reliable and straightforward integration through user-friendly drag and drop operations.
The Soundweb Contrio AC-V is an analog wall controller available in black or white, designed for BSS Audio Soundweb London devices. It features a 47k Ohm logarithmic potentiometer for volume control and connects to General Purpose Inputs (GPI). The AC-V can interface with up to 12 GPI-equipped devices simultaneously or 36 with the BLU-GPX model. This straightforward controller is configured via HiQnet London Architect or HiQnet Audio Architect software, primarily for managing volume levels.
The AR-133 from BSS is an active direct box designed for use with various electronic sources, including keyboards, DJ consoles, amplifier outputs, and guitars. It features a rugged aluminum extrusion case with polyurethane end-cheeks and arched design for efficient cable management. The unit can be powered by console phantom power or a 9V battery (not included), with automatic switching to battery if phantom power fails, ensuring uninterrupted operation.
The BLU-102 is a fully configurable audio processor with open architecture, customizable through HiQnet™ London Architect. It supports up to 8 independent AEC algorithms, with automatic gain control and noise cancellation for each. The device features a 48-channel low latency digital audio bus, using standard Category 5e cabling, and is compatible with the full Soundweb London family of devices.
The BLU-50 is a half-rack width processor featuring four inputs and four outputs with configurable signal and logic processing, and a 48-channel BLU link digital audio bus. It offers software configurable gain, phantom power, and LED indicators for signal monitoring. Power options include an included 12VDC supply, 12-48VDC via a terminal block, or PoE+ through the Ethernet port. Controlled via HiQnet Audio Architect™ or HiQnet London Architect™, the BLU-50 integrates seamlessly with other Soundweb London devices, supporting distances up to 100m with standard cabling and beyond 10km using fiber media converters.
The BSS Audio BLU-DAN Bridge Processor provides Dante/AES67 connectivity for BLU Link devices, supporting 64 x 64 channels at 48 kHz. Features include primary and secondary RJ45 ports for fault tolerance, an additional RJ45 and RS-232 port for control, LED indicators, HiQnet Audio Architect compatibility, and a half-rack design. It comes with Cat 5e/6 cable compatibility up to 328′, rack mounting hardware, power cable, and rubber feet.
The BSS Audio BLU-HIF Telephone Headset Interface enables integration of a VoIP/digital phone with a Soundweb London device through its headset jack, simplifying conference system setups by serving as the dialing interface and hybrid. It includes an RJ-22 jack, balanced input for near-side audio, and balanced output for far-side audio, with built-in isolation and side-tone management through an AEC input.
The BLU-PCI is a professional half-height PCI-Express sound card tailored for Harman BLU link network audio systems, offering 32 or 64 channels of BLU Link audio for playback and recording, and is ideal for use in 2U servers to support high-density channel audio applications.
The BSS BLU-SI card offers a seamless 32 x 32 interface integration between Soundcraft Si Series consoles and the BLU Link digital audio bus, supporting connection with various Harman products including the BSS London BLU 800, dbx® PMC, and Crown® PIP-BLU interfaces. It facilitates 256-channel, low latency, fault-tolerant audio transmission over 100 meters using standard CAT 5e cabling.
The BSS Audio BLU-USB USB Audio to BLU Link Interface enables seamless audio integration from a Windows or Mac computer directly to a BLU link audio buss, ideal for corporate meeting rooms. It overcomes USB transmission distance limitations by converting audio close to the source, allowing processor placement up to 328 feet away. The device supports up to eight audio channels for use with conferencing systems, with configuration managed via rear panel dip switches.
The Soundweb London Digital Input card is engineered to fit any of the four card slots on Soundweb London BLU series devices, allowing them to receive AES/EBU and S/PDIF audio signals, thereby expanding the audio input capabilities of models such as BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32, and BLU-16.
The Soundweb London Digital Output card fits into any of the four card slots on the BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32, and BLU-16 devices, enabling them to receive AES/EBU and S/PDIF audio signals.
The Soundweb Contrio EC-4B is an Ethernet wall controller designed for Harman HiQnet systems, capable of managing and monitoring BSS Audio Soundweb London and other HiQnet devices, such as Crown DCi series amplifiers. Available in black or white for US Decora single-gang installation, the EC-4B features an Ethernet port for configuration, control, monitoring, and PoE. Configuration is streamlined through drag-and-drop in HiQnet Audio Architect software.
The EC-4BV is a versatile controller featuring a push/rotary encoder, an encoder ring, four multicolored backlit buttons, and a 64×128 pixel LCD screen. The encoder supports continuous, binary, and preset control functions, with the ring displaying audio levels or settings. Buttons offer control over mute, preset recall, or source selection. The screen displays custom text and the device includes a sleep mode to minimize distractions. It can be locked via control systems or a PIN and supports dynamic reassignment of controls.
The Soundweb Contrio EC-8BV is an Ethernet wall controller designed for Harman HiQnet systems, capable of controlling and monitoring BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers. Available in black or white, the dual-gang US Decora EC-8BV features an Ethernet port for configuration, control, monitoring, and power via PoE, configured through HiQnet Audio Architect software. It includes a push/rotary encoder, encoder ring, eight multi-color backlit buttons, and two LCD screens, offering flexible control options for various parameters like volume and mute, as well as preset recall.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our privacy policy.
