Equally suited to both live and studio environments, the ULTRAGRAPH-PRO FBQ3102HD from Behringer is dual-channel 31-band EQ featuring a proprietary FBQ feedback detection system, a handy tool for identifying problematic frequencies in a room, or for use as an audio analyzer.
Additional hi- and low-cut filters, sweepable in frequency, aid in mitigating unwanted hiss or rumble, while ultra-low noise 4580 operational amplifiers seek to bolster the sonic performance of this unit. Utilizing an on-board crossover frequency selector, a dedicated mono XLR out helps separate frequencies that are more suitable for the subwoofer than the mains. The unit also provides both 1/4″ TRS and XLR connection points.
The ULTRAGRAPH PRO FBQ6200 from Behringer is a professional 31-band stereo graphic equalizer for both live and studio applications. Its FBQ Feedback Detection System instantly detects feedback frequencies and can also be used as an audio analyzer, making the unit a welcome addition to every touring setup.
Dedicated limiters with gain reduction meters for each channel protect the sound system from overload and distortion, and a pink noise generator provides test signals for equalizing the system to any room acoustics. The unit also provides a dedicated mono subwoofer output with adjustable crossover frequency.
Unwanted frequencies such as floor rumble and tape hiss can be removed utilizing the additional sweepable high and low cut filters for each channel. The FBQ6200 utilizes ultra low-noise audio operational amplifiers that provide outstanding sound performance. High-quality 45mm illuminated faders, detent ALPS potentiometers and illuminated switches provide reliability and longevity of use.
Equally suited to both live and studio environments, the ULTRAGRAPH-PRO FBQ6200HD from Behringer is dual-channel 31-band EQ featuring a proprietary FBQ feedback detection system, a handy tool for identifying problematic frequencies in a room, or for use as an audio analyzer.
Additional hi- and low-cut filters, sweepable in frequency, aid in mitigating unwanted hiss or rumble, while ultra-low noise 4580 operational amplifiers seek to bolster the sonic performance of this unit. Utilizing an on-board crossover frequency selector, a dedicated mono XLR output—with variable output control—helps separate frequencies that are more suitable for the subwoofer than the mains. The unit also provides both 1/4″ TRS and XLR connection points.
An on-board limiter on both channels allows you to protect your system from audio overloads. Pink noise generators offer test signals to help adapt the unit to the specific frequency characteristics of various and different rooms
The MINIFBQ FBQ800 from Behringer is an ultra-compact, nine-band graphic equalizer that also contains a feedback detection system that instantly reveals critical frequencies and that can also be used as an audio analyzer. An additional low cut filter removes unwanted frequencies such as floor rumble.
An accurate six-digit LED input/output meters and level control are provided for precise level indication. Long-term reliability is guaranteed with high-quality illuminated faders, potentiometer and illuminated switches.
Ultra low-noise audio operational amplifiers offer outstanding sound performance. In addition, all Mini Series models can be stacked on top of each other to create an ultra-compact signal processing solution.
The GTX60 from Behringer is a guitar amplifier with 60 watts of power, a built-in guitar tuner, a digital effects processor, an overdrive distortion channel, a headphone output, and an input for an external device like a CD player, MP3 player, or a drum machine. It features many useful tools that every guitarist needs, which used to require several purchases to attain.
There are two separate channels on the GTX60, which gives you a variety of tones to switch between. One channel is designated as a “clean” channel, for the natural sound of the guitar. The other channel features an overdrive gain with tone and contour controls that enable you to achieve a variety of crunchy and distorted sounds. A foot switch is included that lets you change seamlessly between the two channels, to build up dynamic songs and performances.
You don’t have to worry about the battery dying on your guitar tuner, because the GTX60 has one built in. A 24-bit digital effects processor is also included to sweeten your sound with 16 presets of reverbs, delays, choruses, and flangers. There is also a dedicated input for a CD/MP3 player, so you can jam along with your favorite music. A headphone output is also included so you can play anytime without disturbing anyone.
The Behringer GMX212 True Analog Modeling 120W Guitar Amp with (2) 12″ Speakers is a powerful amp with 27 classic sound presets. Get vintage tones with Behringer’s amp and speaker modeling technologies pumping through the dual 12″ Bugera speaker powered by 60W each with a 3 band-EQ. Jam with your favorite bands with CD input or custom tailor sound with the 24-bit stereo multi-effects processor with 99 user presets of your favorite stompbox sounds with MIDI control available. Plug your headphones in quiet practice sessions but hear full, rich sound with speaker simulation.
The Behringer GMX1200H True Analog Modeling 120W Guitar Amp Head is a powerful amp head with 27 classic sound presets. Get vintage tones with Behringer’s amp and speaker modeling technologies to pump through the speakers of your choosing. This head is ideal for use with Behringer Ultrastack cabinets. Jam with your favorite bands with CD input or custom tailor sound with the 24-bit stereo multi-effects processor with 99 user presets of your favorite stompbox sounds with MIDI control available. Plug your headphones in quiet practice sessions but hear full, rich sound with speaker simulation.
Get some huge tube tone from the tiny Bugera T5 INFINIUM Guitar Amplifier Head. With this head weighing in at under 10 pounds, you can take it from silent headphone practicing in your apartment to the recording studio, or to your next club gig and plug it into a (separately available) cabinet. The simple single-channel design allows you to dial in your tone quickly, while the PHAT switch adds a gain boost and bypasses the EQ section for a more raw sound. Onboard reverb completes the package, adding subtle ambience or washy overtones to your sound.
Aesthetically, the T5 features a vented metal top which shows off the 12AX7 preamp and EL84 power amp tubes’ glow, along with the other amp components. An orange classic jewel status light shines when the power is on.
The Behringer VT100FXH 100W 2-Channel Guitar Amplifier Head delivers the performance and feature set to any gig or rehearsal. The 2-channel design provides clean and overdrive channels for maximum versatility and the crunchy distortion guitarists crave. Behringer’s Virtube VTC (Virtual Tube Technology) adds professional-grade tube warmth and tone at the flick of a switch.
High, Mid and Low tone controls are featured on both channels; a contour control is also provided on the overdrive channel for maximum control over distortion. The VT100FXH also features a powerful DSP effects processor with hundreds of reverb, chorus and delay effects. All this in a compact amp head design with 100 watts of powerful audio output.
The Behringer VT100FX 100W 2-Channel Guitar Amplifier delivers the performance and feature set to any gig or rehearsal. The 2-channel design provides clean and overdrive channels for maximum versatility and the crunchy distortion guitarists crave. Behringer’s Virtube VTC (Virtual Tube Technology) adds professional-grade tube warmth and tone at the flick of a switch.
High, Mid and Low tone controls are featured on both channels; a contour control is also provided on the overdrive channel for maximum control over distortion. The VT100FX also features a powerful DSP effects processor with hundreds of reverb, chorus and delay effects. All this in a compact design that houses a 12″ BUGERA driver and 100 watts of powerful audio output.
The 45-Watt ACX450 features two channels: one with a single 1/ 4″ input jack and a second with a 1/4″ input and XLR input, making it the ideal amp for a one-person show with an acoustic guitar and a mic for vocals. Just turn the GAIN dial to determine the levels of each channel. Both channels feature a four-band EQ equipped with BEHRINGER’s FBQ Feedback Detection System for instant feedback elimination. You also get a 24-bit FX processor per channel featuring 16 incredibly presets such as reverb and delay. We also include a footswitch for remote activation of the effects.
The Behringer VT15FX 15W 2-Channel Guitar Amplifier delivers the performance and feature set to any gig or rehearsal. The 2-channel design provides clean and overdrive channels for maximum versatility and the crunchy distortion guitarists crave. Behringer’s Virtube VTC (Virtual Tube Technology) adds professional-grade tube warmth and tone at the flick of a switch.
High, Mid and Low tone controls are featured and a contour control is also provided on the overdrive channel for maximum control over distortion. The VT15FX also features a powerful DSP effects processor with reverb, chorus and delay effects. All this in a compact design that houses a 8″ BUGERA driver and 15 watts of powerful audio output.
The Behringer VT30FX 30W 2-Channel Guitar Amplifier delivers the performance and feature set to any gig or rehearsal. The 2-channel design provides clean and overdrive channels for maximum versatility and the crunchy distortion guitarists crave. Behringer’s Virtube VTC (Virtual Tube Technology) adds professional-grade tube warmth and tone at the flick of a switch.
High, Mid and Low tone controls are featured on both channels; a contour control is also provided on the overdrive channel for maximum control over distortion. The VT30FX also features a powerful DSP effects processor with hundreds of reverb, chorus and delay effects. All this in a compact design that houses a 10″ BUGERA driver and 30 watts of powerful audio output.
n
nDesigned to facilitate the digital recording of guitars, basses, and more, the Behringer GUITAR 2 USB is an all-in-one interface and cable. At one end, it sports your standard 1/4″ plug for guitars, basses, mandolins, and anything else with a 1/4″ instrument jack. At the other end sits a USB Type-A connector for plugging straight into your computer.
n
nThe cable is 16.5′ long, giving you plenty of slack should you need to preserve your mobility whilst recording. On the digital side, this product is capable of handling sample rates of 44.1 and 48 kHz. Compatible with the software and drivers of most 32-bit Mac and Windows products, the GUITAR 2 USB cable interfaces with the built-in Core Audio drivers for Mac, as well as low latency ASIO drivers for PC, and works with nearly all of the popular 32-bit compatible recording software such as Ableton Live, Avid Pro Tools, Steinberg Cubase, and more, enabling you to record directly into your favorite DAW.
n
n
Designed to facilitate the digital recording of guitars, basses, and more, the Behringer GUITAR 2 USB is an all-in-one interface and cable. At one end, it sports your standard 1/4″ plug for guitars, basses, mandolins, and anything else with a 1/4″ instrument jack. At the other end sits a USB Type-A connector for plugging straight into your computer.
The cable is 16.5′ long, giving you plenty of slack should you need to preserve your mobility whilst recording. On the digital side, this product is capable of handling sample rates of 44.1 and 48 kHz. Compatible with the software and drivers of most 32-bit Mac and Windows products, the GUITAR 2 USB cable interfaces with the built-in Core Audio drivers for Mac, as well as low latency ASIO drivers for PC, and works with nearly all of the popular 32-bit compatible recording software such as Ableton Live, Avid Pro Tools, Steinberg Cubase, and more, enabling you to record directly into your favorite DAW.
